SICCO Comfort search
Search in products
Search in products
 
Article number
Article number
 

Basket: Empty

SICCO Super-Star-Desiccator, PMMAGlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3

Technical information:

Proper use of desiccantRelative humidityGlossaryRelative humidityPercentage ratio between water vapor pressure and saturated water vapor pressure over a clear and even water surface. On this basis it is easy to evaluate how quickly evaporation will proceed or how large is the danger of condensation. The quantity of water vapor which would be needed for saturation increases with increasing temperature. Similarly the relative humidityGlossaryrelative humidityPercentage ratio between water vapor pressure and saturated water vapor pressure over a clear and even water surface. On this basis it is easy to evaluate how quickly evaporation will proceed or how large is the danger of condensation. The quantity of water vapor which would be needed for saturation increases with increasing temperature. Similarly the relative humidity of a given air mass falls with increasing temperature. Temperature is therefore an important factor in assessing relative humidity and condensation. of a given air mass falls with increasing temperature. Temperature is therefore an important factor in assessing relative humidityGlossaryrelative humidityPercentage ratio between water vapor pressure and saturated water vapor pressure over a clear and even water surface. On this basis it is easy to evaluate how quickly evaporation will proceed or how large is the danger of condensation. The quantity of water vapor which would be needed for saturation increases with increasing temperature. Similarly the relative humidity of a given air mass falls with increasing temperature. Temperature is therefore an important factor in assessing relative humidity and condensation. and condensation.

Suitable products:

Super-Maxi 1-Desiccator

Drawer and Collecting Tray

Please click to enlarge

Panels: clear

Material: PMMAGlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3

Temperature resistance: from -20°C to +70°C

Use: normal pressure

Stand: rubber feet

Product description
AluminiumGlossaryAluminiumThis metal stands out due to its very low density of 2,7 g/cm³ (approx. 3 times lighter than steel) and is especially used for the frame and shelves. Aluminium is very reactive right after being machined and therefore reacts with the substances of the surrounding environment, air and humidity, which covers the material with a protective oxide layer. This oxide layer prevents a further corroding of the aluminium but is dissolvable in acids and bases. Thus a direct contact with chemicals should be avoided. frame with panels made of acrylic glass, including four shelves made of acrylic glass, tray, hygrometerGlossaryhygrometer Device gauging humidity or content of water vapour in the air. , desiccant, cylinder lock and hose (5 m) with two quick couplings for gas filling, usable with up to 26 shelves, stackable.

Product advantages
» Reinforced aluminium frame with acrylic panels
» Door with magnetic catch, circular rubber seal and cylinder lock
» Extra big electronic hygrometerGlossaryhygrometer Device gauging humidity or content of water vapour in the air. 
» Variable height shelves
» Two connections for gas filling including quick couplings with self-sealing valves and hose
» Telescopic shelves


Overall dimensions
W x H x D mm
310 x 525 x 375
Additional place requirement for coupling
mm
150 pro Seite/per side
Usable interior space
W x H x D mm
260 x 480 x 330
Capacity
liters
51
Weight
kg approx.
7
Maximum all-over loadGlossaryload Maximum load which can be stored on a surface, e.g. on a shelf of a desiccator. Important for customized desiccators.  per shelf
kg
10
Total all-over loadGlossaryload Maximum load which can be stored on a surface, e.g. on a shelf of a desiccator. Important for customized desiccators. 
kg
30
Bore dia. of quick couplingGlossaryquick coupling Ideal for frequent opening and changing of lines. The integrated non-return valves close as soon as the quick coupling is disconnected. Thus components stored inside the desiccator are protected from oxygen. 
mm
Ø 6
Bore dia. in panels
mm
Ø 16,5
Cat.-No.V 1875-07
Price1,00 and more: 928,87 Euro per piece
Quantity

Applications
SICCO Desiccators for gas-filling provide ideal conditions for safe and secure storing of poisonous chemicals. Rare or inert gas like nitrogen can be introduced as soon as the door is closed tightly. Compared to the ambient air the inert gas does not react with the stored substances.

To comment this item

Thank you for adding your comments. Simply fill in this form. Your contribution will be published on our website immediately.








Comments other customers regarding this item