SICCO Comfort search
Search in products
Search in products
 
Article number
Article number
 

Basket: Empty

Accessories for desiccators

On the following pages you can find practical accessories which will help you to adapt your SICCO Desiccators to your application. Increase space for your humidity sensitive products by using additional shelves or drawers…..

Monitor the exact conditions inside the desiccators with a hygrometerGlossaryhygrometer Device gauging humidity or content of water vapour in the air.  or a humidity-temperature probe with USB-interface. Hoses, trays, desiccant? Just take a look at following pages! Of course you will receive all this in the usual SICCO high quality.

SICCO Electronic HygrometerGlossaryHygrometer Device gauging humidity or content of water vapour in the air.
Cat.-No. V 1859-...
Suitable for Star Desiccators and Maxi Desiccators, including battery, calibration report Reslution 0,1% rh/0,1°C, measuring cyle 18 seconds HygrometerGlossaryHygrometer Device gauging humidity or content of water vapour in the air. for continuous measurement of humidity, dew pointGlossarydew pointThe dew point is the temperature at which water vapour starts to condense. and temperature, with optical LED alarm, long-run stable, sturdy, maintenance-free, humidity sensor inured to condensation, calculation of dew pointGlossarydew pointThe dew point is the temperature at which water vapour starts to condense. td, indication of maximum and minimum values. Measuring range: » -10 to +70°C +/- 0,5°C » +2 to 98% rh, +/-2% » -40 to +70°C td » durability 8.736h
 
SICCO Shelves
Cat.-No. V 1860-...
made of PMMAGlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3GlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3, transparent, suitable for VacuumGlossaryVacuum The pressure of a gas in a vessel is lower than atmospheric pressure or lower than 300 mbar (the lowest possible atmospheric pressure on earth’s surface). In colloquial language, vacuumGlossaryvacuum The pressure of a gas in a vessel is lower than atmospheric pressure or lower than 300 mbar (the lowest possible atmospheric pressure on earth’s surface). In colloquial language, vacuum describes a free space.  describes a free space. Desiccators
 
SICCO Shelf including two rails
Cat.-No. V 1860-...
Suitable for Maxi Desiccators and Big Star Desiccators, Edelstahl, including two aluminium rails.
 
SICCO Shelf
Cat.-No. V 1860-...
Suitable for Star Desiccators (except for Horizontal Star); including two rails.
 
SICCO Shelf
Cat.-No. V 1860-...
suitable for Star Desiccators (except for Horizontal Star); stainless steel including two rails made of polyamide. Suitable for Star Desiccators with Serial Number higher than 2117, except for Star Vitrum Desiccator.
 
SICCO Shelf
Cat.-No. V 1860-...
Suitable for Star Desiccators (except for Horizontal Star); made of PMMAGlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3GlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3, including two aluminium rails. Suitable for Star Desiccators up to Serial No. 2116.
 
SICCO
Cat.-No. V 1860-...
suitable for Star Desiccators (except for Horizontal Star); PMMAGlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3GlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3; including two rails made of polyamide. Suitable for Star Desiccators with Serial Number higher than 2117.
 
SICCO Shelf
Cat.-No. V 1860-...
suitable for Horizontal Star Desiccator, PMMAGlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3GlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3, including two aluminium rails. Suitable for Desiccators up to Serial No. 2116.
 
SICCO Shelf
Cat.-No. V 1860-...
Suitable for Horizontal Star Desiccator, PMMAGlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3GlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3; including two rails made of polyamide. Suitable for Desiccators with Serial Number higher than 2118.
 
SICCO Shelves for Mini Desiccators
Cat.-No. V 1860-...
made of PMMAGlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3GlossaryPMMAcoll: acrylic glassalso known under the tradename Plexiglas® of company Evonik Röhm GmbHSynthetic, thermoplastic material; Break proof and impact resistant;Very good surface, shiny; Good resistance to dilute acids and alkali, limited resistance to organic solvents; Flammable properties similar to hardwood;Very low production of smoke if burnt; Gases emitted when burning are neither toxic nor corrosive; Usable up to approx. +70 °CVolume resistivity: >10^15 Ohm/cm,test specification DIN VDE 0303,Surface resistivity: 5 x 10^13 Ohm,test specificationDIN VDE 0303, part 3;Transmittance tD65: ~92 %,test specification DIN 5036, part 3, transparent, suitable for Mini-Desiccators
 
SICCO Tray
Cat.-No. V 1861-...
Suitable for Star Desiccators
 
SICCO HygrometerGlossaryHygrometer Device gauging humidity or content of water vapour in the air.
Cat.-No. V 1863-...
Suitable for Mini Desiccators. With max-min function, including LR 44 button cell, fastener and fastening screws. Measuring range: » Temperatures between -10°C and +60°C » Humidity between 10 and 99 r.h. Max. measuring error: » +/-1°C between -10° and +50°C » +/-5% r.h. at 25-75% r.h. and 0-50°C
 
SICCO HygrometerGlossaryHygrometer Device gauging humidity or content of water vapour in the air.
Cat.-No. V 1863-...
Suitable for Star Desiccators and Maxi Desiccators. With max-min function, including LR 44 button cell, fastener and fastening screws. Measuring range: » Temperatures between -10°C and +60°C » Humidity between 10 and 99 r.h. Max. measuring error: » +/-1°C between -10° and +50°C » +/-5% r.h. at 25-75% r.h. and 0-50°C
 
SICCO Hose for gas filling
Cat.-No. V 1864-...
Suitable for Super Star Desiccator, Super-Maxi 1 and Super-Maxi 2 Desiccators. PVC hose for introduction of gas, including two quick couplings made of POM and non-return valve.
 
SICCO HygrometerGlossaryHygrometer Device gauging humidity or content of water vapour in the air.
Cat.-No. V 1866-...
Suitable for Star Desiccators and Maxi Desiccators. With max-min function, including 1,5V AAA battery and fastener. Measuring range: » Temperatures between -10°C and +60°C » Humidity between 10 and 99 r.h. Max. measuring error: » +/-1°C between -10° and +50°C » +/-5% r.h. at 25-75% r.h. and 0-50°C
 
SICCO Humidity-Temperature Probe with USB-Interface
Cat.-No. V 1868-...
Suitable for Star Desiccators and Maxi Desiccators, including carry case and Windows-software for measured value display and data recording as well as USB plug type A, 1.1 or 2.0 compatible. Combined temperature and humidity probe which can be directly driven by a PC by means of USB interface in handle, wide measuring range, high resolution, very good linearity and durability, calculation and indication of dew pointGlossarydew pointThe dew point is the temperature at which water vapour starts to condense., absolute humidity, vapor pressure, saturated vapor pressure and enthalpy, tabulated measured values, data are recorded on hard disk, humidity is measured with a long-term stable, capacitive polymer sensor, for monitoring store rooms in food production industry, quality control or HVAC technology, humidity measuring systems for custom projects, microcontroller applications, for Windows or Linux Measuring range: » 0–100% rh, ± 2 % and -40 to 80 °C, ± 0,5 K » Humidity: 0,01% rh » Temperature: 0,01 K
 
SICCO USB Data Logger
Cat.-No. V 1869-...
Suitable for Star Desiccators and Maxi Desiccators, including software for Windows 98/2000/XP/Vista, lithium battery (lifespan approx. 1 year for recording intervals of 5 seconds or 2.5 years for recording intervals of 10 seconds), wall bracket, operating instructions on CD. Compact data logger with built-in lithium battery for recording temperature and humidity. The stored data can be read out via USB interface and charted with the included software or exported for further processing with other programs (e.g. Excel). For recording of 16.000 measurements of temperature and humidity. » Temperature measuring range:-40 to +70 °C, ± 1 °C Response time: approx. 20 s » Air humidity measuring range: 0–100 % rh, ± 3 % Response time: approx. 5 s » Accuracy of dew pointGlossarydew pointThe dew point is the temperature at which water vapour starts to condense. (at 25 °C and 40–100 % rh): ± 2 °C Resolution: 0,1 °C / 0,1 % rh » Reading frequency: 2 / 5 / 10 / 30 seconds, 1 / 5 / 10 / 30 minutes, 1 / 2 / 3/ 6 / 12 / 24 hours
 
SICCO Desiccant
Cat.-No. V 1895-...
Silica gelGlossarySilica gelSilica gel is a colourless amorphous silicic acid with a gel-like consistency. It has a large inner surface area. It is very hygroscopic and can be used as gelling agent, filtering or absorption material and desiccant. Normally coupled with an indicator, silica gelGlossarysilica gelSilica gel is a colourless amorphous silicic acid with a gel-like consistency. It has a large inner surface area. It is very hygroscopic and can be used as gelling agent, filtering or absorption material and desiccant. Normally coupled with an indicator, silica gel changes colour as soon as it absorbs water; the gel remains pourable and dimensionally stable even in saturated condition. It can be regenerated on a metallic sieve or on a baking tray at approx. 90–110 °C (a microwave oven is not suitable for regeneration!). changes colour as soon as it absorbs water; the gel remains pourable and dimensionally stable even in saturated condition. It can be regenerated on a metallic sieve or on a baking tray at approx. 90–110 °C (a microwave oven is not suitable for regeneration!). with colour indicator from orange to dark brown and black (does not contain cobalt-II-chloride). Grain size 2,0 - 5,0 mm, loss after drying <=4%.
 
SICCO Desiccant Cartridge
Cat.-No. V 1901-...
Aluminium cartridge with encapsulated silica gelGlossarysilica gelSilica gel is a colourless amorphous silicic acid with a gel-like consistency. It has a large inner surface area. It is very hygroscopic and can be used as gelling agent, filtering or absorption material and desiccant. Normally coupled with an indicator, silica gel changes colour as soon as it absorbs water; the gel remains pourable and dimensionally stable even in saturated condition. It can be regenerated on a metallic sieve or on a baking tray at approx. 90–110 °C (a microwave oven is not suitable for regeneration!)., saturation is displayed on the top side by colour indicator from blue to pink.
 
SICCO Desiccant Cylinder
Cat.-No. V 1902-...
Aluminium cylinder with encapsulated silica gelGlossarysilica gelSilica gel is a colourless amorphous silicic acid with a gel-like consistency. It has a large inner surface area. It is very hygroscopic and can be used as gelling agent, filtering or absorption material and desiccant. Normally coupled with an indicator, silica gel changes colour as soon as it absorbs water; the gel remains pourable and dimensionally stable even in saturated condition. It can be regenerated on a metallic sieve or on a baking tray at approx. 90–110 °C (a microwave oven is not suitable for regeneration!)., saturation is displayed on the top side by colour indicator from blue to pink.
 
SICCO Desiccant
Cat.-No. V 1903-...
Silica gelGlossarySilica gelSilica gel is a colourless amorphous silicic acid with a gel-like consistency. It has a large inner surface area. It is very hygroscopic and can be used as gelling agent, filtering or absorption material and desiccant. Normally coupled with an indicator, silica gelGlossarysilica gelSilica gel is a colourless amorphous silicic acid with a gel-like consistency. It has a large inner surface area. It is very hygroscopic and can be used as gelling agent, filtering or absorption material and desiccant. Normally coupled with an indicator, silica gel changes colour as soon as it absorbs water; the gel remains pourable and dimensionally stable even in saturated condition. It can be regenerated on a metallic sieve or on a baking tray at approx. 90–110 °C (a microwave oven is not suitable for regeneration!). changes colour as soon as it absorbs water; the gel remains pourable and dimensionally stable even in saturated condition. It can be regenerated on a metallic sieve or on a baking tray at approx. 90–110 °C (a microwave oven is not suitable for regeneration!). with colour indicator from orange to dark brown and black (does not contain cobalt-II-chloride). Grain size 2,0 - 5,0 mm, loss after drying <=4%, in resealable container.
 
SICCO Drawer and Collecting Tray
Cat.-No. V 1951-...
Suitable for Maxi Desiccators and Big Star Desiccator, Edelstahl, including two aluminium rails.
 
SICCO Drawer and Collecting Tray
Cat.-No. V 1952-...
Suitable for Star Desiccators, Edelstahl, including two rails made of aluminium or PA.
 
Print page Recommend page © 2013 BOLA